News

Pay attention to us, understand the fresh information!

Activity dynamics

Synergistic Treatment Technology of Desulfurization and Dust Removal in Single Tower of Desulfurization System

Synergistic Treatment Technology of Desulfurization and Dust Removal in Single Tower of Desulfurization System

The country's requirements for reducing emissions of major pollutants are constantly escalating. How to choose a convenient transformation, technically feasible, stable operation, less investment in desulfurization, dust co-processing device transformation has become an urgent problem to be solved. The single-tower desulfurization and dust removal collaborative processing technology of gas-liquid rebalance flow homogenizer, sieve tray phase and condensation mist eliminator was first applied in Sanmenxia Company. It provides new ideas and new options for ultra-low emission retrofit.

28

2017-03

About Sewing of Coated Filter Bag of Bag Filter

About Sewing of Coated Filter Bag of Bag Filter

With the rapid development of economy and the further improvement of people's living standards, the emission requirements of toxic and harmful particulate pollutants in various countries are becoming more and more strict. The "Ambient Air Quality Standard" published by the Ministry of Environmental Protection of my country also requires the daily average concentration limit of PM2.5 to be 0.075 mg/m, which requires urban industrial production and combustion emissions to pay attention to dust collection and emission reduction. Some enterprises require the total emission concentration to reach below 5 mg/m, and even require zero emissions. At this time, some bag filter bags require film. The biggest advantage of the membrane filter bag is to achieve the surface filtration, the principle is through the smooth surface of the microporous expansion.

28

2017-03

Principle, measurement results and application fields of powder fluidity

Principle, measurement results and application fields of powder fluidity

Principle: The angle of repose is the maximum angle formed by the free inclined plane of the powder accumulation layer and the horizontal plane. The angle of repose can not only be measured directly, but also can be calculated after measuring the height of the powder layer and the radius of the disk. The smaller the angle of repose, the smaller the friction and the better the fluidity. The flow rate is the time required to add the material to the funnel and measure the total flow out. The degree of compression is the measurement of the initial loose volume after a certain amount of powder is gently loaded into the cylinder. Measurement results: the different environments of the powder in different processing processes and practical applications, the instrument can simulate these different environments when actually measuring the powder, and characterize the powder needle.

28

2017-03

< 1 >

Changzhou Kedi Powder Equipment Co., Ltd.

Address:
Mobile Phone, Wuyi Village, Hengshanqiao Town, Jingkai District, Changzhou City: +8615961223578 +8613776822960
Fax: 0519-88610522
Mailbox: sales1@czkdft.com

Mobile terminal website

Hot Keywords

Dry mortar equipment

Dry mortar production line

Ready-mixed mortar equipment

Ready-mixed mortar production line

Gypsum mortar equipment

Gypsum mortar production line

Mixer

Mixing equipment

Dry powder mixing complete equipment

Dry powder weighing and mixing equipment

Copyright © Changzhou Kedi Powder Equipment Co., Ltd.

business license

图片名称

苏公网安备32040002010407

Powered by: www.300.cn | Label