WZF double-shaft paddle gravity-free mixer
Overview
WZF double-shaft paddle gravity-free mixer has high mixing performance, short mixing time, strong body matching ability, and can be equipped in production lines with high output.
During the operation of this mixer, the rotation speed of the power group driving the shaft and the special structure of the blade cause the material to lose weight instantly during the operation, so it can meet the mixing of most raw materials with different physical properties. Therefore, it is called gravity-free mixer.
is widely used in dry-mixed mortar, thermal insulation materials, food, medicine, chemical industry, feed, metallurgy, electronics, coatings and other industries.
Performance Characteristics
1. It is mainly the mixing between powder and particles. A large amount of liquid can also be sprayed into the material during mixing, but the material is now solid powder during the whole mixing process.
2. When the equipment mixes the material, the material is in a high-energy motion state, so the unprepared power requirement is high;
3. The time required for the mixing table is the shortest in the mechanical mixing equipment, and it is better to be configured as production equipment on the assembly line.
4. A jacket structure is installed outside the equipment to realize the functions of mixing, drying and cooling at the same time.
5. A fast rotating flying knife can be installed in the field of dry powder mortar, which can effectively disperse fibers quickly.
Working Principle
WZF Double-shaft Blade Gravity-free Mixer Horizontal Twin U-shaped Cylinder is equipped with a pair of main shafts with opposite rotation directions. A certain number of combined blades with a certain angle are installed on the main shafts, which greatly reduces maintenance costs and can be divided into small and large doors.
When mixing materials:
1, horizontal shaft rotates, and the materials churn up and down;
2, double shaft rotation in opposite directions, material exchange left and right, shear;
3, the blade is pushed at a certain angle, and the material moves circumferentially in the cylinder.
Previous
Previous
Next
